Change language
|
ROCHEM Fyrewash Ltd
5-6 Sun Valley Business Park
Winnall Close, Winchester
Hampshire
SO23 0LB
ROCHEM Fyrewash Inc
23707 West Hardy Road
Spring
Texas
77373
Subscribe to our newsletter for important news and updates.
22 Oct 2026
The operating profile of gas turbines changes over time. Small tweaks to practices over the weeks, months, and years add up to a duty profile unrecognizable from how the turbine started out.
Often, cleaning strategies lag behind; a schedule set up for the gas turbine’s original operating pattern remains unchanged and is no longer suitable. This can have a big impact on productivity and equipment lifespan without you even realizing.
So, here’s the question: is it time to review your gas turbine cleaning strategy?
The way we generate electricity has changed a lot in recent years, and how we use gas turbines today is not the same as when their maintenance programs were originally set up.
As wind and solar power generation has increased, the habitual use of gas turbines has dropped. However, when wind or sun is insufficient to meet demand, gas turbines are fired up to fill the gaps. This has led to more ad hoc use: more starting and stopping, and a very different usage profile than those foreseen under classic base-load or cyclic operations.
Existing inspection intervals were likely set on the assumption that the gas turbine will predominantly run at base load. If that is no longer the case, it’s important to review these intervals and make any necessary changes to maintenance practice.
With the emphasis on renewable power, it may be surprising that demand for new gas turbines remains relatively high. Demand currently outstrips supply, and there is at least a five-year waiting time from order to delivery of large gas turbines. This means many older turbines are still in use and often stick to outdated cleaning schedules.
A gas turbine's age can affect how its usage has changed. US Energy Information Administration data suggests newer, more efficient plants run more, with combined-cycle plants averaging a 64% capacity factor. Meanwhile, those built in the 1990s average 35%, running less often/more flexibly.
Whether your gas turbine now operates more or less often, or at higher or lower loads, has your cleaning schedule kept up? If you haven’t reviewed your strategy in a while, it’s a good idea to do so now.
After acknowledging your turbine’s duty program has changed since implementing your current cleaning schedule, you’ll likely be wondering whether cycling or peaking causes more compressor fouling. We can't categorically say whether one is ‘worse’ than the other, as there isn’t enough evidence to guide us. The simple rule is: if your duty has changed, you should review your cleaning strategy.
What we do know is that fouling levels are heavily influenced by airborne deposits, and a variety of factors include:
It can be tricky to know when to review your cleaning strategy, which is why they go unchanged for years, sometimes decades. If the turbine appears to be working fine, it’s tempting to leave things as they are.
However, if you take a closer look, your gas turbine may be giving you telltale signs that it needs a clean. Signs such as a gradual reduction in power output and higher exhaust heat may go unnoticed but could indicate fouling and associated loss of efficiency. This article details the signs you can look for.
Another good way to determine if your cleaning strategy should be reviewed is to answer these questions:
If you answered “yes” to any of the above, check that your cleaning program is still suitable and adjust it if needed.
Deciding on a new cleaning schedule can feel daunting. The biggest question is whether you should clean at regular, scheduled intervals (calendar-based) or when the condition of the gas turbine compressor requires it.
Washing after a set period or number of operating hours may be what your OEM requirements specify, and you should follow it. This method is a good rule of thumb and starting point to ensure a level of cleanliness.
Using performance and condition to help decide when a wash is necessary/worthwhile. This approach can help in particularly harsh environments where foulants may accumulate faster than OEMs expect.
A regular pattern of online and offline washing is sensible, as it ensures the cleans are completed. It’s a good starting point, but it’s useful to keep collecting and monitoring performance data. The art is finding the right balance, and timings will differ from one turbine to another. Plus, when turbine operation changes, the schedule should be reviewed.
Regular on-line washes are extremely useful for minimizing foulants. However, off-line washes, which give cleaning chemicals more contact time, are also important for removing stubborn build-up. Read more about the differences between on- and off-line washes here.
Encouragingly, Meher-Homji and Bromley state that when performed correctly, off-line washing “will typically restore virtually 100 percent of the lost power and efficiency attributed to compressor fouling.”
If your gas turbine now has more periods of downtime, these could be useful opportunities for off-line washes. Are you making the most of them?
On the other hand, if your turbine is running harder with fewer shutdowns, are you neglecting off-line washing to the detriment of your equipment?
It’s time to look at how your turbine currently runs, not how it ran when your cleaning schedule was devised, and ensure it considers:
Keep OEMs in mind regarding off-line washing procedures, including cool-down requirements before washing.
Turbine location and even the time of year inevitably have a huge impact on compressor cleanliness. Because most foulants enter via the air, variables such as pollen and humidity not only affect fouling levels but also vary site-to-site and season-to-season.
Look back at your site’s historical performance for the best guide to fouling levels and their fluctuations. Do seasonal patterns affect cleanliness at your site? Could a tweak to your cleaning schedule address this?
Whether your turbine’s duty changed years ago or more recently, if you haven’t reviewed your cleaning strategy since then, it’s time to take a look.
This useful checklist helps you decide if you need to review:
Compressor cleaning works best as a program, not a one-off maintenance task. Operating profile, environment, compressor condition, wash equipment, chemistry and wash timing all affect the result. With so many variables, review your cleaning program when something changes to ensure you’re still getting the most out of your washes.
If you’re ready to review your cleaning program and have any questions, please get in touch. We specialize in cleaning equipment and chemicals for gas turbine compressors and can help tailor a strategy optimized for your site.
References
Post written by Martin Howarth
An extensive knowledge of mechanical and electrical engineering together with hands on experience with gas turbines provides a bedrock for his work at Rochem.
