SAVE with R.O.I


SAVE
and see where you can
save money.

Simply use our calculator to provide your R.O.I

Effective gas turbine compressor cleaning

FYREWASH® is a range of powerful specialist compressor cleaning chemicals exhibiting outstanding performance. They're designed for all types of fouling and meet current OEM and environmental standards world-wide. All of the Rochem FYREWASH® chemical range is suitable for both on-line and off-line washing.

Which FYREWASH® Chemical should I use?

FYREWASH® F1 is the best original solvent cleaner for heavy duty on and off-line compressor cleaning.

FYREWASH® F2 is a great low foaming cleaner with a natural and renewable solvent.

Use FYREWASH® F3 where conditions require an environmentally friendly water based cleaner. This product has typically lower foaming than other products with a higher percentage of active cleaning ingredients.  We also produce the F3 in an Oil & Gas formula which is CEFAS approved for offshore applications.

Finally the FYREWASH® F4 is a biodegradable water-based chemical which is a blend of surfactants producing a powerful solvent, capable of removing the widest spectrum of fouling.

​To request more information or a quotation please use the FYREWASH® request form.

FYREWASH® F1

A HIGH PURITY HYDROCARBON SOLVENT & SURFACTANT FORMULATION FOR HEAVY DUTY ONLINE & OFFLINE COMPRESSOR CLEANING

FYREWASH® F1 was developed to give the maximum possible cleaning efficiency and effectiveness from a compressor cleaning chemical that can used for both online & offline washing. FYREWASH® F1 can be used with any on-line/off-line injection system but for optimum cleaning results and economic usage of chemicals use with a Rochem FYREWASH® specialist cleaning system designed specifically for your gas turbine types.

Rochem offers a full range of patented manual or fully automatic atomising injection systems to suit any engine type.

FEATURES and BENEFITS
  • Safely and effectively cleans compressors on-line when running at any speed and load.
  • Extremely effective compressor cleaner.
  • On-line cleaning reduces damaging shutdown/start-up thermal cycles and starter wear and tear.
  • Ideal for off-line cleaning due to high biodegradability.
  • Leaves no chemical residue.
  • 100% safety record in thousands of gas turbines over millions of operating hours.
PROPERTIES
  • APPEARANCE: Colourless
  • SHELF LIFE: 5 years.
  • TYPICAL PROPERTIES: Density 0.847g/ml@ 20°C, Flash point 88°C, Fluid form, PH 7.4 (20% in water).
  • DILUTION: FYREWASH® F1 concentrate with four (4) parts of water into a stable solution.
  • APPLICATION: FYREWASH® F1 can be used with any on-line or off-line injection system.
  • WATER RINSE: Online washing best practise is to perform rinse ush with demin water. Off line washing rinse until ef cient runs clear.
  • ANTIFREEZE: Add antifreeze below +10°C, FYREWASH® F1 is compatible with Methanol, Propylene Glycol, Ethylene Glycol. Rochem manufacture a superior freeze point depressant, Rochem FPD, please contact Rochem for further information.

To request more information or a quotation please use the FYREWASH® request form.

Download product datasheets

FYREWASH® F2

A WATER BASED CLEANER CONTAINING A RENEWABLE SOLVENT FOR ON-LINE AND OFF-LINE COMPRESSOR CLEANING

FYREWASH® F2 was developed to give the maximum possible cleaning efficiency and effectiveness from a natural-solvent chemical. The pine oil solvent & ultra-pure surfactants used in the FYREWASH® F2 formula make it a very safe & user-friendly product for both online & offline compressor cleaning. Approved & meets most major OEMs world-wide.

F2 can be used with any on-line/off-line injection system but for optimum cleaning results and economic usage of chemicals.

FEATURES and BENEFITS
  • Ideal for light and frequent on-line washing of any type of industrial, marine or aviation gas turbine to maintain in-service output and fuel efficiency.
  • On-line cleaning reduces damaging shutdown/start-up thermal cycles and starter wear and tear.
  • Ideal for off-line cleaning due to high biodegradability.
  • Mixes readily with most antifreeze agents to allow low ambient temperature on-line/off-line cleaning.
  • Backed by Rochem’s unique high value product liability insurance.
APPLICATION

F2 can be used with any on-line and off-line injection system.

ON-LINE GAS TURBINE CLEANING

On-line gas turbine cleaning is normally performed by mixing one part FYREWASH® F2 concentrate with four (4) parts of water into a stable solution. The volume of chemical solution needed per wash and the optimum cleaning frequency will depend upon engine size, operating environment and fouling tendency. It is recommended that a post rinse is performed to ensure that the nozzle system is cleaned and ready for next operation.

OFF-LINE GAS TURBINE CLEANING

Concentrated FYREWASH® F2 is normally mixed with four (4) parts of good quality water. The solution is injected at cranking speed, allowed to soak for 20 to 30 minutes then thoroughly rinsed off at cranking speed with good quality water acceptable to the engine manufacturer. This compressor cleaning chemical can be used without dilution for offline cleaning, providing a superb cleaning result for heavily fouled compressors.

To request more information or a quotation please use the FYREWASH® request form.

Download product datasheets

FYREWASH® F3

HIGHLY BIO-DEGRADABLE WATER BASED DETERGENT FOR ONLINE & OFFLINE COMPRESSOR WASHING.

FYREWASH® F3 was developed to give the maximum possible cleaning efficiency and effectiveness from a non-solvent chemical. When developing and testing FYREWASH® F3, Rochem’s chemists evaluated all other leading non-solvent water-based chemicals to make sure that F3 would have superior cleaning qualities. These gas turbine cleaning chemicals are also available in containers lint-free wipes. Treated with FYREWASH® F3 gas turbine compliant cleaning chemical these wipes are ideal for hand cleaning of gas turbines blades and other gas turbine parts.

F3 can be used with any on-line/off-line injection system but for optimum cleaning results and economic usage of chemicals.

FEATURES and BENEFITS
  • This product is ideal for frequent on-line washing of any type of industrial, marine or aviation gas turbine to maintain in-service output and fuel efficiency.
  • Mixes readily with most antifreeze agents to allow low ambient temperature on-line/off-line cleaning.
  • Supplied in concentrated form reducing delivery costs and minimising storage requirements.
  • Worldwide product support.

To request more information or a quotation please use the FYREWASH® request form.

Download product datasheets

FYREWASH® F3 O&G

ULTRA PURE BIO-DEGRADABLE WATER BASED DETERGENT FOR ONLINE & OFFLINE COMPRESSOR WASHING ON OFFSHORE OIL & GAS PLATFORMS.

FYREWASH® F3 O&G was developed to give the maximum possible cleaning efficiency and effectiveness from a non-solvent chemical, whilst being able to meet the stringent standards for offshore use.

Work undertaken by Rochem's chemists resulted in a non-hazardous, user-friendly and highly biodegradable water-based compressor cleaner which now sets the standard against which the performance and cost effectiveness of all other true non-solvent water-based gas turbine compressor cleaners can be judged. F3 O&G can be used with any on-line/off-line injection system but for optimum cleaning results and economic usage of chemicals.

Fyrewash F3® O&G is also available in containers of 200 pcs of 38 x 16cm lint free wipes. Treated with Fyrewash F3® O&G gas turbine compliant cleaning chemical these wipes are ideal for hand cleaning of gas turbines blades and other gas turbine parts.

FEATURES and BENEFITS
  • Safely and effectively cleans compressors on-line when running at any speed and load.
  • Extremely effective non-solvent cleaner.
  • Meets the most stringent requirements of gas turbine manufacturers.
  • Can be supplied as wipes for cleaning many other gas turbine parts.

To request more information or a quotation please use the FYREWASH® request form.

Download product datasheets

FYREWASH® F3 RR

DEVELOPED SPECIALLY TO MEET & CLEAN ROLLS ROYCE GAS TURBINE COMPRESSORS.

FYREWASH® F3-RR was developed to give the maximum possible cleaning efficiency and effectiveness from a non-solvent chemical. When developing and testing FYREWASH® F3-RR, Rochem's chemists evaluated all other leading non-solvent water-based chemicals to make sure that F3-RR would have superior cleaning qualities. As a result, we created safe, easy to use and biodegradable chemicals for turbine washing, made to the highest standards.

F3-RR has been approved and meets Rolls Royce specification for online and offline washing. CEFAS Approved for use offshore. It can be used with any on-line and off-line injection system. We recommend using it with one of our manual or fully automated injection system to ensure the highest results have been achieved.

FEATURES and BENEFITS
  • Safely and effectively cleans compressors on-line when running at any speed and load.
  • Supplied in concentrated form to reduce transport and handling costs and minimise storage requirements.
  • Worldwide product support.
  • Backed by Rochem's unique high value product liability insurance.

To request more information or a quotation please use the FYREWASH® request form.

Download product datasheets

FYREWASH® F4

EXTREMELY EFFECTIVE NON-SOLVENT CLEANER FOR ONLINE & OFFLINE COMPRESSOR WASHING

FYREWASH® F4 was developed to give the maximum possible cleaning efficiency and effectiveness from a non-solvent chemical. Rochem's R&D department have developed this product using state of the art technology, resulting in a non-hazardous, user-friendly and biodegradable water-based cleaner. FYREWASH® F4 sets the standard against which the performance and cost effectiveness of all other true non-solvent water-based gas turbine cleaners can be judged.

FYREWASH® F4 is a highly biodegradable product, according to OECD 301-A test and has no cloud point for complete temperature stability throughout the compressor.

FYREWASH® F4 meets all major OEM’s specification requirements world-wide and have a high temperature stability and can be used with any on-line/off-line injection system.

FEATURES and BENEFITS
  • Meets the highest requirements of gas turbine manufacturers.
  • No cloud point.
  • Perfect for light and frequent on-line washing of any type of industrial, marine or aviation gas turbine to maintain its output and fuel efficiency.
  • Mixes readily with most antifreeze agents allowing low ambient temperature on-line/off-line washing.
  • This product is supplied in concentrated form to reduce delivery costs and storage requirements.

To request more information or a quotation please use the FYREWASH® request form.

Download product datasheets

Back To Top